Double Glazing Lock Repairs
The best locks for your doors and windows will help prevent burglars from gaining entry into your home. They don't usually like breaking glass or trying to squeeze through windows.
However, some double glazing owners have had problems with their door or window lock after it was installed. These problems can often be fixed without the need for a new double glazing.
Broken or damaged locks
If your uPVC door or window lock is damaged or broken or has a problem, a locksmith will repair it for you. They can fix the hinges, striker plates and locks on your double glazing. They can also move the cylinder around to fix any misalignment problems that may be causing your handle to not work properly.
If the key fits into the lock but it won't turn or is difficult to insert, the mechanism might be locked up. The dirt or grease could get stuck in the mechanism. If this is the situation it could be possible for the lock to be cleaned and lubricated. It is essential to apply a dry lubricant such as graphite or teflon instead of oil which can attract dirt and stick to the inside of the mechanism. After having lubricated, insert double glazing repairs into the lock and turn it. The lubricant should get into the mechanism and the lock should spin easily.
A malfunctioning lock could be caused by loose screws in the lock mechanism. They may loosen and fall out or break off completely, preventing the lock from working correctly. The screws can be tightened using a screwdriver, but be careful not to over tighten them. This can damage the internal components.
A broken lock can be hazardous for your family and you. This is particularly true if you have small children. It can be easy for them to unlock the door without your knowledge and allow them access to your home. If you're concerned that this might occur, a licensed professional locksmith can help to secure the double glazing doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing, who can repair all types of faulty and damaged mechanisms handles, handles, cylinders, and lock systems on uPVC windows and doors. We can also reconfigure the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always required.
Handles that are damaged or broken
As part of their overall security plan, most double-glazed windows feature a multipoint lock. This is a great option for those who are worried about potential burglars trying to gain entry to their home. Ask your installer about antilift blocks. They can be put in as an addition to the existing locks and can aid in keeping your windows closed.
Handle locks are often damaged or fail. They are the first thing criminals utilize to force open your window. Fortunately, the good news is that this is among the easiest parts to repair.
Modern handles made of aluminium and uPVC have a multi-point locking mechanism called Espagnolette which is designed to withstand forced entry. This security upgrade is available as an option on new uPVC windows. Older style uPVC and aluminum handles can be upgraded to shoot bolt locking systems, again as an optional feature on all new double-glazed windows.
If a handle is damaged, it's crucial to get it repaired as soon as is possible. Faulty handles may prevent the window from closing properly and permit drafts to get in. It could also be a vulnerability that thieves who are opportunistic could take advantage of and put your family's possessions and your own at risk.
To repair the damaged mechanism, you must first gain access to the window frame and remove the damaged handle. The gearbox is then accessed to identify the type of gearbox used to open the handle. This will permit a replacement that matches the profile and the internal window frame mechanisms.
After the mechanism has been repaired the handle can be returned to the original screws. However, we suggest replacing them with longer screws to ensure an even more secure fit. The final step is to seal the handle with a clear sealant. This will shield it from further corrosion. Once that's done, your window will be fully operational again, and at only a fraction of the cost of replacing the entire window.
Hinges that are broken or Faulty
If your windows don't close properly, you may experience draughts, the weakening of your home's security and an increased chance of damp or water damage. Broken or faulty window hinges are a common problem that can be fixed easily.
If you have a uPVC window that won't open or close and close, it's likely that your hinges are broken or damaged and need to be replaced. Most window companies will require you to buy an entirely new window unit to address this problem, but we can replace the hinges in order to save you money.
Window hinges are often damaged from repeated use or they might be damaged by corrosion over time. If you have a broken window hinge, it is crucial to take the necessary precautions to prevent further damage. This means not causing the window to open or close.
The type of hinge you are looking for will help you locate the correct parts to fix it. Maco, Mila and Roto are all window hinges. It is recommended to consult a professional in this case so that you don't make the mistake of buying parts that are not compatible with your current hardware and could cause further damage.
The hinges that are not working properly can be a huge issue for uPVC doors and windows. They can be a significant source of noise and also allow for water infiltration which could damage your windows.
Verify that the pin barrels on both sides of the hinge are aligned. If it's not then tap the headpin using a hammer in order to create a slight bend in hinge barrel. This will help keep the pin in place. Ask a second person to hold the door as you remove the hinges and hinges from both the doorjamb and the door. Replace the hinges and install screws with glue. After the glue is drying, secure the hinges with clamps or weights.
Once the hinges have been fixed, you should be able to put back the door and re-attach the handle. Replace the screws with wood dowels of the same size as the screw that was used to ensure that they are compatible.
Glass that is broken or is damaged
While uPVC windows do a great job of keeping the cold out and the heat in, they may become damaged over time. This can include broken or damaged glass, as well as faulty locks. If not taken care of, it can be a costly problem. This can also detract from the aesthetics of your home and cause a loss of insulation. It is crucial to fix any damage as soon as it occurs.
You can repair your cracked glass by yourself if you have the appropriate tools and techniques. First, make sure the surrounding area around the glass is free of debris to ensure that any shards do not cause injury to anyone or are an accident-prone area. Then, take any pieces of broken glass and dispose of them in a safe manner. Then, place masking tape to the entire area to stop fragments from bouncing around and sticking to your skin when you move them. Making sure the glass pane is fitted prior to gluing it in place is recommended when you have windows that have two panes. This will ensure you have enough space to complete your project.
Before applying the glue, wipe the surface of the damaged frame and the glass with an unclean, dry cloth. Follow the instructions for application and curing that can differ from product to. Depending on the angle of the crack, you may want to secure the glass while it is curing. You can do this using lightweight clamps specifically designed to support fragile materials.
After the adhesive has completely cured, carefully install the glass inside the window frame. Make sure it is in line with the frame edge and that there aren't any gaps between the glass sash and the frame. Be careful not to bend the glass when you put it back in place, as this could weaken the seal. This could lead to water infiltration or condensation.
Contact a professional glazier like O'Brien(r) to arrange an exchange if your glass window has been completely broken. Unattended handling of broken glass can be a risk to pet and children, so it's essential to act swiftly.